Drying Equipment manufacturers Triple Pass Dryer The triple pass dryer is mainly used for drying granular materials in a certain humidity range, such as sand used in the dry mortar industry and various specifications of sand used in the foundry industry. Blast furnace slag for building materials and cement industry. According to the requirements of different industries for the final moisture content of the dried materials, the moisture content of the dried materials can reach 1 to 0.5%. The material entering the dryer must be non-stick. The temperature of hot air entering dryer should not be higher than 750 degrees Celsius. If there is special requirement for high temperature drying, the inner tube and the lifting plate at the entrance of the dryer can be made of heat-resistant steel plate. Features 1. Simple structure 2. High efficient heat utilization 3. Long life span Technical Parameter Model桅2脳4.5m桅2.2脳5m桅2.5脳6m桅2.7脳6.5m桅3.0脳6.5m桅3.2脳7m桅3.6脳8m桅4.2脳8m Diamater锛坢锛?/p>22.22.52.73.03.23.64.2 Length锛坢锛?/p>4.5566.56.5788 Volume锛坢3锛?/p>14.1318.9929.4337.1945.9256.2781.39110.78 Drum Rotation (r/min)4-104-104-104-104-104-104-104-10 Highest temperature锛堚剝锛?/p>700-750700-750700-750700-750700-750700-750700-750700-750 Capacity锛圱/h锛?/p>13-1815-2320-2824-3335-4040-6055-7570-120 Motor power锛坘w锛?/p>5.5脳27.5脳25.5脳47.5脳411脳415脳418.5脳415脳4Drying Equipment manufacturers website:http://www.jxjq.com/drying-equipment/